If you want the best looking nails at a fraction of the cost, learning how to apply polyurethane nails is for you. Polygels are the in between of an acrylic nail and a regular acrylic manicure.
They’re much harder than acrylics but more flexible than gel nails as well. This makes them an ideal nail solution for strong, beautiful nails that really last. Here’s how to get started.
How to apply polygel nails
Start with a clean, dry, salon-grade fingernail or toenail. Apply a thin coat of polyurethane with a cotton ball on each nail. Use a single, thin brush stroke to smoothly glide the coating from one nail to the next. Be very careful not to cover any of the cuticles.
The polyurethane will dry to a translucent color and form a protective film. You can use your preferred nail clippers to trim the film if you want a cleaner finish.
Trim the film as described above, but instead of starting at the top, go to the bottom. Using a clean fingernail or toenail, start gluing the nails in place.
Use a dual form of nail tape to make it easier to attach the nails to the finger. Polyurethane has a dual form of adhesive; one that’s meant for regular nails and another for the new thicker, dual forms of gel nails.
Clean out the nail clippers. If your nails have cracks or separations, you can use an alcohol scrubber or alcohol pad to clean them. If your nails are smooth and shiny, you can simply wipe away any excess residue with a cotton swab or alcohol pad.
Once clean and dry, gently shake off any excess gel. This will help keep the double bonds from stiffening up and breaking off during use.
Start with one nail and push it under the dual forms of gel until it is sitting firmly on the nail bed. It will be covered with a clear lip stick that you can use to protect it while it dries.
If the base nail is shorter, you will need to wait several hours before scraping it free. For longer dual-form nails, you can just use rubbing alcohol or a nail brush to remove them.
After the nails are ready, you can move on to learning how to apply polyurethane nails properly. Depending on your nails’ shape and size, you may need to apply the glue only on the portions that are visible. It is also possible that some parts may need more than one application.
The next step in the process is to apply the coat of glue on the entire nail. Make sure to smooth out any lumps by using your finger.
Once you are finished, you need to allow the glue to dry for about five minutes. Then you can put another coat on top of the first one and let it dry as usual.
How to apply polyurethane nails is quite easy. As mentioned earlier, you should start with one coat and allow it to dry thoroughly.
Then you can apply another coat and buff it until it is glossy and ready to use. In addition, it is important to make sure that your hands are well moisturized during and after application to maximize its effectiveness.
What products to use for protecting the nails
Depending on the type of polyurethane used for these nails, you will need to use other products to protect them. One such product is a clear nail polish. Using this polish will help you to block sunlight from coming into the nails.
When applying it, you should wait until it has dried completely before applying the next coat of polyurethane. This will ensure that your nails get the full effect of the chemical.
Another helpful tip on how to apply polyurethane nails is to use a high pressure sprayer. This tool is perfect for spraying the nail bed for maximum absorption.
However, this should only be done when the nails have just been painted. Using a high pressure sprayer will cause damage to the polyurethane coating if you are not applying the coating correctly.
The final tip on how to apply polyurethane nails is to leave them to dry overnight. It can take several days for your nails to be completely dry.
The first coat of paint should be ready the day after you apply them. Once they are fully dried, you can apply a topcoat or clear topcoat as needed.
Make sure that you are using the correct type of product and application techniques when learning how to apply polyurethane nails.
How to apply polygel nails without UV light
If you’re looking for an easy tip on how to apply polyurethane on how to complete a nail, then you’ve found it.
This article will tell you all the secrets that professional painters use to make sure their nails remain beautiful and natural even when under the harsh UV light. Although some people choose acrylic nails over other types, no one wants to show off their natural nails by exposing them to the sun.
Your nails should always reflect your personality. In this article we will reveal how to apply polyurethane on how to complete a nail and keep your nails beautiful for many more years to come.
Before you begin applying your polyurethane, make sure the nail is clean and dry. You will also need a cotton ball to apply the polyurethane.
Make sure that the cotton ball is alcohol-free. Polyurethane should be applied to a clean nail, and not to an already infected or brittle nail.
Before beginning how to apply polyurethane on a nail, remove any old nail polish from the nail. There are two ways to accomplish this. One way is to simply scrape away the old nail polish with a knife, or some other scraper.
The other way is to use acetone or hydrogen peroxide in order to gently dissolve and remove the old nail polish. Be very careful when removing old nail polish, as if not done correctly, your new polyurethane will not stick properly.
After scraping away the old nail polish, it is time to begin how to apply polyurethane on how to complete a nail.
Once the old nail polish has been removed, it is time to clean the nail bed. Acetone or hydrogen peroxide pad can be used to clean the nail beds, but it is best to have a wet nail clippers to remove as much of the water as possible.
Now it is time to apply the polyurethane to the nail. A sharp needle or other narrow object is best for scraping the product from the cuticle to expose the adhesive.
It is important to scrape even though applying the polyurethane, because any extra water could cause the product to adhere to the nail incorrectly.
Scraping the polyurethane thoroughly and then applying the product to the nail will help ensure that it is properly attached to the cuticle.
It is important to first cut the nails to make sure they are clean and clear of debris before applying the product. Once the nails are clean and clear, it is time to apply the polyurethane to the nail beds.
The tool used to apply the product must be able to penetrate into the cuticle and the cuticles on the nails to ensure the glue bonds properly to them.
Applying too much glue can create problems with the glue holding to the cuticles and result in a mess. Once the glue is properly applied, it is a simple process of repeating the steps above until the nails are painted.
What to take into consideration
A typical nail project will contain nails, cuticles, and polyurethane. The nails can be individual nails or in pairs and may be a single or double strand depending on the project. When dealing with long nails, it is best to use a hot nail gun for ease and speed in applying the glue.
Once the glue is completely dry, the nail can be trimmed to perfection using an instrument of the desired length. While applying the nail, care must be taken not to damage or Nick the underlying cuticles.
Most DIY projects are relatively simple, but there are always certain challenges that can be anticipated. When learning how to apply polyurethane on how to complete a nail project, the DIY experience comes into play.
It is important to pay attention to the directions and hand tools before proceeding. When completed safely, this DIY project can lead to many years of enjoyment using one of the most versatile and durable bonding solutions available today.
How to apply polygel on natural nails
How to apply polyurethane on natural nails involves the application of a thick consistency of the product to your nail, followed up with the use of a special nail file and a hard acrylic pad.
If you’re one of those people that has beautiful nails but hate getting your hands dirty, then this might just be the answer for you!
Don’t worry though; it doesn’t take a lot of time to learn how to apply polyurethane on natural nails and to master this particular nail art. Once you know how to do it, the rewards are fantastic!
One of the first things you will want to keep in mind when learning how to apply polyurethane on natural nails is the type of natural nail you have. Different nails require different products. For example, those with natural nail have a tendency to develop calluses.
These can become thick and cracked if they don’t receive enough Vitamin E. In order to combat this, simply rub some olive oil into the area.
You can also get some Vitamin E directly from vitamin-rich fruit. Just remember to not apply the oil directly to the nail as you don’t want to create an infection!
The next thing you want to know how to apply polyurethane on natural nails is how to do it properly. Start out by applying a thin coat of the product to the outer part of your nail.
After that, you will want to buff your natural nails so that any excess glue has been removed. A cotton cloth can be used to buff, or you can purchase a buffing pad.
This helps remove any excess residue left behind after you apply the product. Once this step is complete, you’re ready to apply the second coat of glue.
The last step is to let your nails dry for a day. Do not walk around with wet nails for at least two full days. If you leave your nails out in the sun, they may dry out and crack.
Also, using acrylics can be harmful, so you may want to choose a drying method that is safe for your type of acrylic paint.
Patience is very important when painting your nails, as thin coats can appear flatter if you let them sit too long. Once your nails are dry, you can put them on your nails like you normally would.
Now that your nails have dried, you can apply them to your nails using a cuticle pusher. There are many different types of brushes to choose from, but one of the best picks is a round brush that will distribute the product evenly.
Nail biting is not uncommon during the application process, so you may want to make sure you are very careful! Apply a couple times more than you think is necessary, just to be sure.
Before you apply polyurethane to your natural nails, you need to ensure that the area has been painted all the way down. Wait an hour or so before applying a top coat. The reason why you want to wait an hour is because you do not want to confuse the acrylic paint with a dry powder.
If you wait to apply the top coat, your new natural nail will not have the same appearance as it would if you applied it first.
Apply the second coat of polyurethane to your natural nails. It is important that you let each coat dry thoroughly, especially if you used a primer.
Once the second coat has dried, it is now ready for its main stage of application. To complete the how to apply polyurethane on natural nails process, cover each nail with a protective coat of paint. You can use a nail brush, or roller paint brushes for even greater coverage.